Bakgrund byggingenjör Advanced remote measurement
has never been easier.
We are introducing a new standard for connected smart measurement of temperature and humidity in construction.

The three main benefits of Celsicom Easy Connect.

EASY IN ALL SITUATIONS

After a quick installation, the logger looks after itself. This leaves you to concentrate on what you do best, checking from your mobile, tablet or computer whenever you like.

HIGH RELIABILITY

All readings are sent from the logger directly and wirelesslessy over NarrowBand Internet of Things (NB-IoT) using a dedicated frequency in the Telia mobile network, minimising the risk of malfunction.

LOW COST

We have driven down costs with carefully selected materials and intelligent production methods. The result is a logger containing and doing much more than the cost would suggest.

No gateway required.
Each logger measures and transmits directly to the cloud.

This is what the future looks like for remote measurement of different environments:

Infografik

“We keep track of the temperature and obtain reliable strength curves.”

Ida Alexandersson at NCC, a concrete contractor for the underground Station Centralen, which is part of the West Link Project.

Everything in a compact logger. For a price which is equally small.

SENSORS

Internal sensors as well as external cable sensors.

ALERTS

If the limits you specified are exceeded, you are alerted by email and/or SMS.

BACKUP MEMORY

Even though all data is sent over reliable NB-IoT technology, the unexpected can always happen. That is why there is an internal memory that can store up to 200 readings.

TRANSMITTER WITH ACTIVATED SIM CARD

Your readings do not need to risk interference by going via a gateway. All data is send from the logger directly up to the Celsiview cloud service.

Move the mouse pointer over the logger or touch it with your finger to see what it looks like inside.

BATTERIES

Everything is powered by two AA batteries that are cheap to replace – after running for a year (with measurements every five minutes and cloud transmissions every three hours – basic settings that are easy to change).

ROBUST AND RESISTANT

The design of the snap-on cover and the screw holes (for wall mounting) makes the logger dust and moisture resistant and keeps it working even in more challenging environments.

You’ll be up and running before you can say “directly connected construction moisture monitoring”.

After these four easy steps, the logger will be working and collecting readings:

Future-proof technology.

Our new system uses NB-IoT to send readings on a dedicated frequency in the Telia mobile network. This frequency is only used to transmit small amounts of data, and not for mobile telephony. This results in very good coverage – even in places where your mobile might not be able to make calls or send SMSs. The technology is future-proof as it is based on a global standard. According to information from Telia, the network covers more than 95% of Sweden.

Not working in construction?
No problem, we can help.

Get in touch so we can sort you out which logger that works perfectly for the conditions you work in.

Receive alerts when the values are exceeded.

With the Celsiview cloud service you can access all the readings whenever you want. You can configure how often you want the logger to transmit data and send alerts when the values are exceeded.

DEMO >

“We really struggled
with the technology
– so the users
don’t have to.”

Stefan Carlsson talks
about developing

Celsicom Easy Connect.

Read more >

WHAT DO YOU NEED TO MEASURE?

We have different loggers for taking measurements during and after construction. Find out which logger best meets your needs.

CHECK OUT THE PRODUCTS >
PEAB-logga
NCC-logga
Skanska-logga
Ocab-logga
EBE-logga
Monomeet-logga